PDA

View Full Version : Meet Muffin.



KooK
06-19-2007, 01:24 PM
She isn't European, but it's my build anyway.

Started life as a stock 00 Mustang GT
http://i15.photobucket.com/albums/a397/KooKaT/100_0086.jpg

At this point in time, I had
4.30 rear end gears
full intake
70mm throttle body
100 shot NX
bassani headers
bassani X-pipe
Magnapacks and Flowmaster 1 chambers bolted together
Eibach Pro-Kit springs
Koni Yellow shocks
Pro-Fab Tubular K-Member
A/C Delete
10th anniv. Cobra wheels
V6 rear bumper
01 Cobra front bumper

So on and so forth, I was able to pull a 13.0@103mph off the bottle and a 12.0@113 on the bottle.

http://i15.photobucket.com/albums/a397/KooKaT/profile2.jpg
http://i15.photobucket.com/albums/a397/KooKaT/headseth.jpg

After that, I put it away for awhile so I could remove the nitrous and install a Hellion turbo kit.

Mods at this time are alot to list, so I'll break them down into the "Major" things.
Hellion Turbo Kit w/62-1 Turbonetics turbo
Granitelli Tubular front end
Gran. front coilovers
Stock 03 Cobra rear end
Megasquirt'n Spark V2.2 board
03 Cobra brake system
CCW Wheels

No times recorded, 387whp with tuning issues on 7psi.

http://i15.photobucket.com/albums/a397/KooKaT/awe3.jpg
http://i15.photobucket.com/albums/a397/KooKaT/awe1.jpg
http://i15.photobucket.com/albums/a397/KooKaT/DSC00892.jpg
http://i15.photobucket.com/albums/a397/KooKaT/73125652.jpg

Current setup I am working on:

Garrett GT45R turbo
99 Cobra Teksid block, stroked to 5.0L with all forged internals (Diamond pistons and custom rods with a VT crank)
03 Mach 1 heads (Stock port, VT stage 2 cams and valvetrain)
Rebuilt 03 Cobra rear w/ stock 3.55 gears and 8 clutch packs.
Aeromotive and Weldon Racing fuel system
Tremec TKO 600RR transmission built to 900 spec
Suspension has yet to be researched

Estimated horsepower when basic setup is finished is 600whp
Estimated horsepower when fine tuned is 800-900whp
Final estimated horsepower with nitrous is 1100whp
http://i25.photobucket.com/albums/c57/KooKaT21/1DSC02756.jpg

cadwiz
06-19-2007, 01:30 PM
Wow
That Is All:d

SDKmann
06-19-2007, 01:43 PM
1100whp? Is that all? hmmm, um WOW!

Kelso
06-19-2007, 01:59 PM
Wow not a stang lover...I actually hate them, but that is NICE!!!!

S13FREEAAK
06-19-2007, 02:31 PM
Very nice.

Great chioce in the CCW's, I used to have a set. Let me know if you ever sell those.

CHARLATAN
06-19-2007, 02:42 PM
I hate Mustangs for the most part...though the sheer power could sway me to enjoy it for 10 seconds. :)

Kelso
06-19-2007, 04:07 PM
I hate Mustangs for the most part...though the sheer power could sway me to enjoy it for 10 seconds. :)

But to get the sheer power you will need to tune it...any version!

DarksideAudi
06-20-2009, 01:48 AM
CCW wheels are SUUUUPER hot, i had a friend in florida with a 1200 HP 2jz swapped SC300...same wheels, beautiful car...

KooK
06-22-2009, 10:14 PM
Holy old ass bumps!