Radiator/hoses/mounts/etc

[BenRo]

I'm currently running an '01 Audi A4 Quattro (Base) with the 2.8L v6. My radiator is toast. I have a couple gearhead friends with the tools and knowledge needed to help me put a new one in, but I just want to make sure I get all the necessary parts. I'm not great with the internal workings of a car personally, so I could use some advice here on what to get and where to get it.

At a bare minimum, I'm assuming I'll need the radiator itself and new upper/lower hoses. My question is, do I also need new hose o-rings or a new radiator mount? Also, I'm having trouble tracking down the dimensions of the stock radiator... I'd rather not have to do any custom drilling or a custom mount, so a direct replacement for the stock would be greatly preffered.

That's about it. If anyone can offer any advice, I'd be greatly appreciative.

[GetAwayFromMe]

You dont need any hoses unless they are cracked. New o rings on the flanges is a good idea. At any parts store when you tell them your make and model should be able to get you bolt in radior no cutting or custom brackets.

[BenRo]

Okay, shop was just trying to nickel and dime me to death then. They wanted to replace the hoses, but they aren't cracked or leaking. Thanks for the quick reply :cool:

[GetAwayFromMe]

well i work at a shop and only time i replace hoses is when they need to be replaced , cracked if they have been under lots of ressure like if the car had a bad headgasket ect.